Good ideas and info on window replacement. If you have any old Aluminum windows – replace them!… I put in vinyl when we built. Double pane, easily opened to clean the bottom part… but now I wonder if maybe triple pane would have been advisiable? I note that the temp near the windows is usually 3 to 5 degrees more or less than the temp on the thermostat (middle of the room. I guess that is not real bad but being that I look at every little bit, maybe the extra would have paid out? WD0AJG
There’s never been a better time to consider replacing those drafty windows in your home.
The design technology has advanced to such a level that you will experience marked and, many times, drastic changes in the comfort level of your home and most importantly, in the energy savings. Utility costs continue to climb, and many of us are literally throwing money out the window! In this age of “Green Living” it’s important for all of us to do what we can, when we can, to lower our energy usage.
What replacement windows should you put in your home?
Replacement windows come in a variety of construction and configurations.
Wood: Wood is one of the most expensive and potentially high maintenance alternatives,especially if you want wood exteriors on the windows. If you’re looking for the wood look on the interior only, many manufacturers offer wood on the inside and a composite material or fiberglass on the exterior. The exterior material generally comes in several colors so they do not need to be painted – ever. Or if you wish, they can be painted. The interiors are typically stained and varnished to your taste. Painting can be done, too.
Vinyl: Vinyl windows have come a long way in the last few years. They are attractive, sturdy and maintenance free. (You still have to wash them!) They also come in several different colors. You can’t paint them, so the color on the inside and outside is what it will be. Vinyl windows are also one of the most cost effective solutions.
Fiberglass/Composite: These windows are available in many colors and they never have to be painted. Or, if you wish, you can paint them the color of your choice. Because the frame is made of glass fibers, it expands and contracts at the same rate as the insulated glass it holds. This puts less stress on the seals and reduces the chance for seal failure. Generally priced between vinyl and wood or wood clad.
Aluminum: Probably not the best choice, unless you’re trying to match something, but technology has improved and many are offered with a thermal break which helps prevent heat loss. These are not approved for the tax credits and rebates.
Basically, the type of windows you choose comes down to the look you wish to have or maintain, and your budget. A good contractor will be able to help you make this important decision. Look for one who will offer you alternatives and choices.
Who installs the windows?
This will depend on where you purchase them. Many window companies offer installation. It has been our experience that this may not be your best choice. Many installers are contracted by the window companies per job or per window. This simply means they install your windows and move on to the next job. In addition, there are factors in the installation that installers do not address, and yes, even the salespeople don’t inform you of, until you realize it at the installation.
You should want the installation to be turnkey. The windows should sit in the openings properly, the trims and moldings installed properly, and the finished product should like it was always there.
You should use a contractor who will take the install from start to finish – doing the installation properly, doing the finish carpentry properly, and doing the painting/staining/varnishing. You want a beautiful finished product that looks like it was always there. And you didn’t have to call three or four specialty contractors to complete the job.
How much energy will you save?
It will vary, but a typical home can save $400-500 per year by replacing single pane or double pane aluminum windows. In addition, rebates and tax credits allow you to save up to $2000.
Conclusion
- Work with a good contractor who will provide the options you require. There are many windows that are good quality and will qualify.
- Don’t succumb to high pressure sales tactics and special, one time offers.
- Look for an installation that is turnkey and when complete looks like the windows were always there.
- Apply for rebates and credits and enjoy your savings!
Greg Kiper is owner of Double Tall Ltd. and Double Tall Construction, a home remodeling contractor in the greater Seattle, WA, area. His company provides complete turnkey service – consult, design and construction – and focuses on high quality workmanship, excellent communication and top-notch service. http://www.DoubleTallLtd.com.
Author: Greg Kiper
Article Source: EzineArticles.com
Digital TV, HDTV, Satellite TV